Large-section industrial extrusion
Wide and heavy profiles produced on high-tonnage presses, ideal as single-piece replacements for welded or bolted assemblies.
Norden Industrial
Industrial, large-section & standard shapes — Large-section and custom-die extrusions to your drawing, plus standard tubes, angles, channels, beams and bar.
Norden Industrial
Industrial, large-section & standard shapes
Large-section and custom-die extrusions to your drawing, plus standard tubes, angles, channels, beams and bar.
| Circle size | up to ~600 mm (custom die) |
|---|---|
| Alloys | 6060, 6063, 6005A, 6061, 6082 |
| Standards | ASTM B221 / EN 755 |
Systems in this series
Multi-hollow structural profiles
Complex hollow sections for decks, floors and load-bearing structures where stiffness-to-weight matters.
Trailer & truck-body profiles
Floor planks, side rails, stakes, roof bows and corner posts for trailers, tippers and van bodies.
Rail & transit profiles
Large floor, side-wall and roof sections plus interior profiles for rail vehicles and bus bodies.
Marine & offshore profiles
Deck, gangway, hatch and superstructure profiles in marine-grade alloys.
Solar mounting rails
Rails, clamps and frame profiles for rooftop and ground-mount PV structures.
T-slot automation profiles
Modular T-slot framing for machine guards, workstations and conveyor structures.
Heat-sink profiles
Finned extrusions for power electronics, LED lighting and inverters, cut and machined to length.
Battery enclosure profiles
Crash-rail, tray and cooling-plate sections for energy storage and e-mobility enclosures.
Data-center & racking profiles
Cabinet frames, cable trays and containment profiles for data centers and telecom.
Round & square tube
Round, square and rectangular hollow sections.
Equal & unequal angles
Sharp and radiused corner angles for framing and trims.
Channels (U) & T-sections
Structural and architectural U-channels and tees.
I-beams & H-sections
Lightweight structural beams to ASTM B221 / EN 755 dimensions.
Flat, square & round bar
Solid bar for machining, busbar and fabrication.
Technical table
Important: Drawings are simplified illustrations; values are nominal, calculated from geometry, to be confirmed by testing.
| Code | Profile | W × D (mm) | t (mm) | Thermal break | A (cm²) | kg/m | Alloy |
|---|---|---|---|---|---|---|---|
| NI-MH300 | Multi-hollow deck section | 300 × 60 | 3.0 | — | 26.1 | 7.047 | EN AW-6005A-T6 |
| NI-TS45 | T-slot 45×45 | 45 × 45 | 2.2 | — | 14.31 | 3.864 | EN AW-6063-T6 |
| NI-RT100 | Rectangular tube 100×50 | 100 × 50 | 3.0 | — | 8.64 | 2.333 | EN AW-6061-T6 |
| NI-IB120 | I-beam 120 | 64 × 120 | 6.0 | — | 14.16 | 3.823 | EN AW-6061-T6 |
| NI-CH80 | Channel 80 | 40 × 80 | 4.0 | — | 7.68 | 2.074 | EN AW-6063-T6 |
Section drawings
PDF catalogue · Full technical catalogue, performance test reports and CAD details are available on request. Request catalogue
Have a drawing? Get a quote in 48 hours.
Upload DWG, DXF, STEP or PDF files. Our engineering team reviews feasibility, die cost and lead time.