Curtain wall stick system
Mullion-transom façade framing with pressure-plate, cap or structural-silicone appearance options, built from profiles cut and fabricated to project drawings.
Norden Facade
Curtain wall systems — Stick curtain-wall mullion and transom series NF-CW50 / NF-CW60, plus unitised, structural-glazing and storefront framing.
Norden Facade
Curtain wall systems
Stick curtain-wall mullion and transom series NF-CW50 / NF-CW60, plus unitised, structural-glazing and storefront framing.
| Face width | 50 / 60 mm |
|---|---|
| Mullion depths | 65–250 mm |
| Profiles | 16 mullions + 12 transoms |
Systems in this series
Unitised curtain wall system
Factory-assembled façade units with stack joints and integrated drainage for high-rise projects and fast site installation.
Structural-glazing façade
Flush glass appearance façades with concealed framing, supplied as profiles and accessories for qualified fabricators.
Storefront & shopfront framing
Ground-floor entrance and display framing with door stiles, sub-sills and centre-set or front-set glazing.
Cladding & ventilated-façade substructure
Brackets, rails and clip profiles for ceramic, stone, composite and metal panel ventilated façades.
Norden Facade
Stick curtain wall mullion & transom series
Norden Facade is our own curtain-wall profile range in EN AW-6063-T6 (6005A-T6 for deep mullions): two face widths, 16 mullions and 12 transoms, with matched mullion/transom pairings for fast system design.
Important: Values are nominal, calculated from geometry; to be confirmed by testing. Simplified sections, no thermal break shown.
Norden Facade NF-CW50
50 mm face width · 8 mullions (65–250 mm) · 6 transoms (65–175 mm)
Learn more →
Norden Facade NF-CW60
60 mm face width · 8 mullions (80–250 mm) · 6 transoms (80–200 mm)
Learn more →All profiles
| Profile code | Type | Depth (mm) | Ix (cm⁴) | Wx (cm³) | kg/m | Alloy |
|---|---|---|---|---|---|---|
| NF-CW50-M65 | Mullion | 65 | 44.05 | 10.57 | 1.555 | EN AW-6063-T6 |
| NF-CW50-M85 | Mullion | 85 | 78.89 | 15.01 | 1.771 | EN AW-6063-T6 |
| NF-CW50-M105 | Mullion | 105 | 126.77 | 20.04 | 1.987 | EN AW-6063-T6 |
| NF-CW50-M125 | Mullion | 125 | 222.19 | 30.89 | 2.651 | EN AW-6063-T6 |
| NF-CW50-M150 | Mullion | 150 | 343.56 | 40.93 | 3.293 | EN AW-6063-T6 |
| NF-CW50-M175 | Mullion | 175 | 498.58 | 51.49 | 3.630 | EN AW-6063-T6 |
| NF-CW50-M200 | Mullion | 200 | 797.52 | 73.70 | 4.666 | EN AW-6005A-T6 |
| NF-CW50-M250 | Mullion | 250 | 1401.10 | 104.85 | 5.476 | EN AW-6005A-T6 |
| NF-CW50-T65 | Transom | 65 | 44.05 | 10.57 | 1.555 | EN AW-6063-T6 |
| NF-CW50-T85 | Transom | 85 | 78.89 | 15.01 | 1.771 | EN AW-6063-T6 |
| NF-CW50-T105 | Transom | 105 | 126.77 | 20.04 | 1.987 | EN AW-6063-T6 |
| NF-CW50-T125 | Transom | 125 | 209.24 | 28.82 | 2.473 | EN AW-6063-T6 |
| NF-CW50-T150 | Transom | 150 | 323.10 | 38.19 | 3.065 | EN AW-6063-T6 |
| NF-CW50-T175 | Transom | 175 | 468.17 | 48.00 | 3.376 | EN AW-6063-T6 |
| NF-CW60-M80 | Mullion | 80 | 75.48 | 15.31 | 1.825 | EN AW-6063-T6 |
| NF-CW60-M100 | Mullion | 100 | 123.52 | 20.57 | 2.041 | EN AW-6063-T6 |
| NF-CW60-M125 | Mullion | 125 | 241.37 | 33.78 | 2.786 | EN AW-6063-T6 |
| NF-CW60-M150 | Mullion | 150 | 371.33 | 44.51 | 3.495 | EN AW-6063-T6 |
| NF-CW60-M175 | Mullion | 175 | 536.40 | 55.68 | 3.833 | EN AW-6063-T6 |
| NF-CW60-M200 | Mullion | 200 | 856.32 | 79.43 | 4.909 | EN AW-6005A-T6 |
| NF-CW60-M225 | Mullion | 225 | 1146.58 | 95.11 | 5.314 | EN AW-6005A-T6 |
| NF-CW60-M250 | Mullion | 250 | 1493.26 | 112.06 | 5.719 | EN AW-6005A-T6 |
| NF-CW60-T80 | Transom | 80 | 75.48 | 15.31 | 1.825 | EN AW-6063-T6 |
| NF-CW60-T100 | Transom | 100 | 123.52 | 20.57 | 2.041 | EN AW-6063-T6 |
| NF-CW60-T125 | Transom | 125 | 227.00 | 31.48 | 2.597 | EN AW-6063-T6 |
| NF-CW60-T150 | Transom | 150 | 348.79 | 41.50 | 3.252 | EN AW-6063-T6 |
| NF-CW60-T175 | Transom | 175 | 503.13 | 51.86 | 3.562 | EN AW-6063-T6 |
| NF-CW60-T200 | Transom | 200 | 810.76 | 74.86 | 4.614 | EN AW-6063-T6 |
PDF catalogue · Full technical catalogue, performance test reports and CAD details are available on request. Request catalogue
Have a drawing? Get a quote in 48 hours.
Upload DWG, DXF, STEP or PDF files. Our engineering team reviews feasibility, die cost and lead time.